| 35-ton CR35RS,4SP, Ultima, Detachable Gooseneck Trailer |
| |
| Model Name: |
CR35RS,4SP |
| Series Name: |
Ultima |
| Code: |
547-000 |
| Capacity: |
35-ton (31.8-metric tonne) |
| Deck Style: |
Platform |
| Deck Length: |
22'-0" (6.7-meter) |
| Deck Height: |
23" (0.58-meter) |
| Deck Width: |
8'-6" (2.6-meter) |
| Load Con Weight: |
70,000-pound (31,751-kilogram) |
| Load Con Length: |
11'-0" (3.4-meter) |
| Suspension: |
50,000 lb. capacity heavy-duty multi-leaf 4-spring |
| Number Axles: |
2 |
| Axle Type: |
22,500 lbs. capacity with oil-bathed bearings |
| Tires: |
255/70R22.5(H) low-profile tubeless radial |
| Wheels: |
22.5 x 8.25 10-hole steel disc |
| Air Brakes: |
16 1/2" x 7" shoes, 4S/2M ABS and spring parking brakes |
some optional equipment may be shown
- ROGERS® CR35,4SPRS is a 35-ton capacity lowboy with four-spring suspension and a rear slope beavertail.
- The exclusive ''Croucher''® front is only 7'' high, with concealed beam hooks that positively connect, so low-ground equipment has easy access.
|
|
- The patented ''No Foot''® self-lifting gooseneck can lift the rated load located anywhere on the deck.
|
|
- Air lines are designed so that they cannot be ''crossed''.
- The 7-wire socket and cable provide trouble-free operation.
|
|
- The opening in the rear frame is a space for an excavator's stick to be tucked in for better height clearance.
- The center cover plate of the rear frame and beavertail allow for safer loading.
|
|
- The 36'' long beavertail has a center cover plate and wood-covered side sections.
|
|
|
| Standard Features |
- Patented ''No Foot''® Direct-Push style gooseneck
- Trap door extension blocks for adjusting 5th wheel height
- Hydraulic gooseneck jack with paddle and shoe
- Hydraulic power source: Tractor PTO
- Ultima deck design with 16'' main beams and 12'' side channels
- Exclusive ''Croucher''® low, tapered front with concealed beam hooks
- Side channel flange reinforcing of first 6'-0'' of deck
- Full 2'' air-dried oak decking; No center boards
|
|
- Total (20) side bracket bearings only
- Total (10) bent lashing D’s
- Slope-type rear frame with sloped bridge ramps
- Rear frame opening from end of deck to trunnions
- Trunnions between wheels
- Oak-covered beavertail, 14° slope; smooth plate between wheels
- US DOT-approved rubber-mounted lights with sealed wiring and 7-wire socket
- Epoxy primer; Rogers Red or Black industrial enamel finish coat: (view samples)
|
|
|
| |
| |
| Optional Equipment |
- Gooseneck fenders
- 13 HP gas engine power unit
- Remote for gas engine
- Gooseneck toolbox with steel lid
- Spare tire carrier
- Deck toolbox, steel or wooden lid
- Front folding ramps
- Laterally adjustable front folding ramps
- Side channel flange reinforcing, full length of deck
- Center boards, installed or loose with spring hold-downs
- Reinforced 1/4'' smooth plate wheel covers with grouser bars
|
|
- (20) removable swinging side brackets
- Additional bent or standard lashing D's
- Manual rear folding ramps, oak-covered or ladder style
- Hydraulic powered rear loading ramps with power pack
- Aluminum disc wheels
- Larger 275/70R radial tires
- US DOT-approved safety light system with ''Deep Cycle'' battery
- LED lights package
- Flag holders
- Backup warning alarm, mechanical or electronic
- Other Rogers paint colors: (view samples)
|
|
|
| |
| Optional Equipment Photo Gallery |
|
|
| View Detachable Gooseneck Series Optional Equipment Gallery... |
| |