| 50-ton CR50, Ultima, Detachable Gooseneck Trailer |
| |
| Model Name: |
CR50 <--- Request for Quote |
| Series Name: |
Ultima |
| Code: |
578-007 |
| Capacity: |
50-ton (45.4-metric tonne) |
| Deck Style: |
Platform |
| Deck Length: |
24'-0" (7.3-meter) |
| Deck Height LD: |
20" (0.51-meter) |
| Deck Width: |
8'-6" (2.6-meter) |
| Load Con Weight: |
100,000-pound (45,359-kilogram) |
| Load Con Length: |
12'-0" (3.7-meter) |
| Suspension: |
Air Ride 25,000 lb. capacity per axle |
| Number Axles: |
tri-axle |
| Axle Type: |
25,000 lbs. capacity with oil-bathed bearings |
| Tires: |
255/70R22.5(H) low-profile tubeless radial |
| Wheels: |
22.5 x 8.25 10-hole steel disc |
| Air Brakes: |
16 1/2" x 7" shoes, 4S/2M ABS and spring parking brakes |
some optional equipment may be shown
- ROGERS® Ultima CR50 is the top of the line lowbed with an unmatched load concentration.
- Its low deck height with the ''bucket pocket'' and ''boom trough'' give better overhead clearance when hauling an excavator.
- Pictured Options: Center boards installed and front folding ramps.
|
|
- ROGERS exclusive ''Croucher''® front deck design has beams tapered top and bottom for an extra low loading angle; and concealed beam hooks ease worry about loading damages.
- Pictured Option: Loose center boards with spring hold-downs; and front folding ramps.
|
|
- When hauling an excavator, the ''bucket pocket'' and the ''boom trough'' create an open design that helps lower the clearance height.
|
|
- The ''No Foot''® Tower style gooseneck has heavy-duty lifting capacity to easily handle a loaded trailer.
- The gooseneck's built-in ''hat box'' fits over the fifth wheel to give clearance for tractor fenders.
|
|
- CR50's tri-axle rear frame.
- Pictured Options: Air lift on the 3rd axle, wheel covers, and aluminum wheels.
|
|
|
| Standard Features |
- ''No Foot''® Tower style gooseneck
- Trap door extension blocks for adjusting 5th wheel height
- Hydraulic gooseneck jack with paddle and shoe
- Hydraulic power source: Tractor PTO
- Ultima four-beam cambered design with 14'' main beams
- Exclusive ''Croucher''® low, tapered front deck with concealed beam hooks
- Side beam flange reinforcing of first 6'-0'' of deck
- 1 3/4'' air-dried oak decking; No center boards
- Total (24) removable swinging side brackets
|
|
- Total (16) bent lashing D's
- ''bucket pocket''
- Arch-type rear frame with sloped bridge ramps
- ''boom trough''
- Trunnions between wheels
- LED lights: US DOT-approved 12-volt rubber-mounted with sealed wiring and 7-wire socket
- Remote air tank drain
- Flag holders
- Epoxy primer; Rogers Red or Black industrial enamel finish coat: (view samples)
|
|
|
| |
| Specifications |
| |
|
| |
| Optional Equipment |
- Gooseneck fenders
- 13 HP gas engine power unit
- Controls for gas engine relocated to side of gooseneck
- Hydraulic trap doors
- Gooseneck toolbox with lockable steel lid
- Spare tire carrier
- Deck toolbox with oak wood lid -OR- lockable steel lid
- Front folding ramps -OR- Laterally adjustable front folding ramps
- Side beam flange reinforcing, full length of deck
- Center boards installed -OR- loose with spring hold-downs
|
|
- Reinforced 1/4'' smooth plate wheel covers with traction bars
- Additional bent or flat lashing D's
- Aluminum disc wheels
- Larger 275/70R radial tires
- Air exhaust valve for all axles
- Axle air lift
- Removable 4th axle
- US DOT-approved safety light system with ''deep cycle'' battery
- Backup warning alarm, mechanical or electronic
- Other Rogers paint colors: (view samples)
|
|
|
| Optional Equipment Photo Gallery |
|
|
| View Detachable Gooseneck Series Optional Equipment Gallery... |
| |