Rogers Brothers Trailers1-800-441-9880
Air & Light Extension
Air & Light Extension
Air and light line extensions are added to the rear of a trailer so that a removable axle can be used.
Air Lift Axle
Air Lift Axle
Air Lift on 3rd Axle for running an empty trailer saves hundreds of dollars a year in reduced fuel use and tire wear.
Air Lift Axle
Air Lift Axle
When the trailer is traveling empty, the axle airlift saves tire wear and improves fuel efficiency by lifting the axle 3'' to 4'' off the ground. An airlift is usually installed on the last axle.
Air Lift Axle
Air Lift Axle
When the trailer is traveling empty, the air lift axle saves tire wear and improves fuel efficiency by lifting an axle 3'' to 4'' off the ground. An air lift is usually installed on the last axle.
Air Ride Suspension
Air Ride Suspension
An air ride suspension provides a smoother ride while allowing the rear frame to be adjusted ±3'' from the standard ride position.
Aluminum Disc Wheels
Aluminum Disc Wheels
Aluminum disc wheels 22.5 x 8.25 10-hole, hub-piloted are available for 35-ton trailers. Aluminum disc wheels 17.5 x 6.75 8-hole, hub-piloted are available for 25-ton trailers.
Backup Alarm / Electronic
Backup Alarm / Electronic
The electronic backup alarm is mounted at the rear of the trailer and comes with a separate wiring harness to work with a tractor's reverse gear.
Backup Alarm / Mechanical
Backup Alarm / Mechanical
The mechanical backup alarm is attached to the hub of a curbside wheel and automatically sounds when the wheel moves backward. Shown here on a hub-piloted 10-hole aluminum disc wheel.
Backup Alarm / Mechanical
Backup Alarm / Mechanical
The mechanical backup alarm is attached to the hub of a curbside wheel and automatically sounds when the wheel moves backward.
Bar Grating
Bar Grating
Bar grating can be installed underneath cross members in the center of the deck. It creates a self-cleaning area to hold chains, binders and blocks.
Bar Grating Deck
Bar Grating Deck
Bar grating for better footing traction is used on the deck of trailers where transformers or other machines are permanently anchored to the trailer frame.
Beavertail (Sloped Rear Extension)
Beavertail (Sloped Rear Extension)
A 36'' long rear extension with a 14° angled slope aides in loading machines over the rear frame of the trailer.
Beavertail, Self-Cleaning (Self-Cleaning Beavertail)
Beavertail, Self-Cleaning (Self-Cleaning Beavertail)
The self-cleaning beavertail is made of angle iron and provides extra traction when loading machines.
Booster Axle Assembly
Booster Axle Assembly
A booster axle assembly connects the rear frame to trailing removable axle(s). Available in spread lengths of 10'-1'' (Top photo, single axle), 12'-1'' and 14'-1'' (Bottom photo, tandem axle). Available axle combinations: 2+1, 2+2, 3+1, 3+2 and 3+3.
Bridge Ramp, Modified (Modified Bridge Ramp)
Bridge Ramp, Modified (Modified Bridge Ramp)
This style of ramp, on a drop side deck frame, makes it easier to load large-tired equipment over the rear frame.
Bucket Pocket (Cross Members notched in deck)
Bucket Pocket (Cross Members notched in deck)
The last (3) cross members of the main frame can be notched to create a ''bucket pocket'' for a large excavator to ride lower on the trailer. A bottom plate or bar grating may be added underneath for storage.
Bumper Stop
Bumper Stop
A bumper stop is welded to the rear channel and serves as a guide to the rear edge of the trailer for loading equipment. (Only available for ''Gentle Riser'' and ''Sloper'' deck styles.)
Center Boards, Loose with Spring Hold Downs
Center Boards, Loose with Spring Hold Downs
Loose center boards, secured with spring hold-downs, can be removed and placed on the swinging side brackets for temporary additional trailer width.
Cover Boards
Cover Boards
Cover boards in the center of the rear frame provide traction for rollers and can be removed for access to a boom trough.
Cover Plate / Flush
Cover Plate / Flush
The reinforced center cover plate is bolted in and can be removed for access to a boom trough in the rear frame. It can also be permanently welded in place, if a boom trough is not needed.
Cover Plate / Recessed
Cover Plate / Recessed
Recessed cover plates can be welded or bolted in place in the center area of the deck or rear frame to meet the customer's preferences for storage space and road spray protection.
Cross Members, notched in deck ("Bucket Pocket")
Cross Members, notched in deck ("Bucket Pocket")
The last (3) cross members of the main frame can be notched to create a ''bucket pocket'' for a large excavator to ride lower on the trailer. A bottom plate or bar grating may be added underneath for storage.
Detachable Rear Frame
Detachable Rear Frame
The detachable rear frame is part of a modular trailer package where different deck styles and sizes can be interchanged for maximum load-hauling utility. ROGERS® uses a simple hook and shaft connection method that eliminates the need for bolts and nuts.
Dock Bumpers
Dock Bumpers
Dock bumpers protect the rear channel and lights from damage when using a loading dock.
Dolly, Helper (Helper Dolly)
Dolly, Helper (Helper Dolly)
A helper dolly distributes a trailer's king pin load between the trailer and the tractor. The helper dolly is made shorter than a jeep dolly for easier maneuverability.
Dolly, Jeep (Jeep Dolly)
Dolly, Jeep (Jeep Dolly)
A jeep dolly helps to distribute a trailer's king pin load between the trailer and tractor. The fifth wheel of the dolly and the tractor are the same height. The jeep dolly is used in States that require longer ''bridges'' to meet weight laws.
Double Landing Gear Package
Double Landing Gear Package
The double landing gear package is mounted on either side of the drawbar near the deck of the trailer. The gears are tied together so that one handle lowers both at once.
Full Width Gooseneck
Full Width Gooseneck
Full width gooseneck offers the most trailer for your money. Load nearly anything over the low profile gooseneck. Overall gooseneck length starts at 11'-7'' with a 30° slope and is covered with oak decking.
Gooseneck Fenders
Gooseneck Fenders
Non-load bearing gooseneck fenders provide road spray suppression for the tractor. The fenders come complete with clearance lights in the front corners and ROGERS® logo mud flaps. The bolt-on design permits field installation. These are available for most fixed gooseneck models.
Hydraulic Trap Doors
Hydraulic Trap Doors
A small hydraulic cylinder to flip the trailer's trap doors instead of manually during loading/unloading.
Associated Equipment Distributors National Trailer Dealers Association Specialized Carriers & Rigging Association Truck Trailer Manufacturers Association

Copyright © 1998-2024 Rogers Brothers Corporation